Non-standard chain when using clean oil in some places or to pay attention.

First, when we are in the non-standard chain cleaning, can not use strong alkali or strong acid cleaning agents, such as rust remover can not be used, because these chemicals easily lead to damage to the chain, broken.

The second to avoid the use of oil and other organic solvents, because it will damage the environment, but also the bearing parts of the lubricating oil washed away.

The third for the non-standard chain between the dirt dirt, with a brush to clean, if necessary, we can also match the temperature of soapy water to clear the accumulation of dirt.

Non-standard chain in the practical application of the requirements of the elastic, not too loose nor too tight, then, we give you explain the non-standard chain can not be too tight requirements.

Non-standard chain will be in the vice axis and the rear wheel buffer between the body to form a larger compulsive moment, under the influence of this moment, the bearing characteristics of the task was destroyed, single-sided force larger, easy to heat damaged. Even if not damaged, will be formed in a shorter time the gap increases. Bearing clearance increases, the vice axis of the task is linearly destroyed, needle roller bearings will soon be damaged, and more serious is that the damage will be transferred from the non-standard chain gear to the gearbox. In the installation must be adjusted before use.